The MB35-F12-1N-5M is a high-precision magnetic field sensor designed for industrial applications. This sensor is manufactured by a leading sensor supplier, Honeywell Sensing & Control, and is widely used in various industries due to its accuracy, reliability, and durability. In this article, we will explore the components, applications, uses, and maintenance of this sensor, as well as how Techno Control Corporation will provide it to industries all over Pakistan.
Components
The MB35-F12-1N-5M sensor consists of a magnetic field sensor chip, a printed circuit board (PCB), and a protective housing. The sensor chip is a Hall effect sensor that converts the magnetic field into a voltage output. The PCB provides the necessary electrical connections and protection for the sensor chip. The housing is made of a durable material, such as epoxy or polyamide, to protect the sensor from environmental factors.
Applications
The MB35-F12-1N-5M sensor is used in various industrial applications, such as position sensing, speed sensing, and current sensing. It is commonly used in motors, generators, transformers, and other electrical equipment to monitor the magnetic field and provide feedback for control and protection purposes.
Uses
The MB35-F12-1N-5M sensor has several uses in industrial applications. Some of the most common uses are:
- Position sensing: The sensor can be used to detect the position of a magnetic object, such as a rotor or a shaft, in a motor or generator. This information can be used to control the position of the object and ensure proper operation.
- Speed sensing: The sensor can be used to measure the speed of a rotating object, such as a motor or a generator. This information can be used to control the speed of the object and ensure proper operation.
- Current sensing: The sensor can be used to measure the current flowing through a conductor, such as a transformer or a motor winding. This information can be used to monitor the current and ensure proper operation.
Maintenance
To ensure proper operation and longevity of the MB35-F12-1N-5M sensor, the following maintenance practices should be followed:
- Clean the sensor: The sensor should be cleaned regularly to remove any dirt, dust, or debris that may accumulate on the surface. This will ensure proper contact between the sensor and the magnetic field.
- Check the connections: The electrical connections to the sensor should be checked regularly to ensure proper contact and continuity. Loose or damaged connections can cause errors in the sensor output.
- Calibrate the sensor: The sensor should be calibrated regularly to ensure proper accuracy and reliability. Calibration involves comparing the sensor output to a known magnetic field and adjusting the output to match.
- Replace the sensor: The sensor should be replaced if it becomes damaged or worn out. Damaged or worn out sensors can cause errors in the sensor output and affect the accuracy and reliability of the equipment.
Techno Control Corporation
Techno Control Corporation is an electrical equipment supplier company based in Pakistan. We provide a wide range of electrical equipment, including sensors, to industries all over Pakistan. We are an authorized distributor of Honeywell Sensing & Control products, including the MB35-F12-1N-5M sensor. Our products are of high quality and are backed by our after-sales service and support.
Download the complete datasheet as a PDF: 
Contact Information
Whatsapp: Contact
Contact Us: Go
Back to Blogs