Table of contents
Component Details
The Allen Bradley Solid State Relay (156-C3P20NCD) is a three-phase, 20A relay designed for industrial control systems. It is a solid state relay that uses semiconductor devices to switch electrical loads instead of mechanical components typically found in traditional contact relays. This solid state relay provides reliable switching for AC loads in three-phase systems, with fast and precise control of the load.
The Allen Bradley 156-C3P20NCD relay features a separate coil for each phase, which ensures symmetrical currents and eliminates the need for multiple input wires for the COMMON terminal. This design results in easier wiring and reduces the risk of wiring errors, which can cause operational issues.
The relay contains reverse voltage protection on all electrical inputs to protect the device from damage in applications with voltage spikes or reverse polarity connections. In addition, the relay has diodes to prevent the generation of electrical noise, which may result in interference with other electronic devices in the system.
The Allen Bradley 156-C3P20NCD relay is also designed for low time delay, which minimizes contact bounce and improves reliability compared to traditional relay technologies. This makes the relay particularly suitable for critical application environments that require high switch points.
The components of the quadratic waveform filter, which minimizes voltage and current harmonics, are all integrated into the relay, making it a compact and efficient device for controlling three-phase electrical loads.
Application
The Allen Bradley Solid State Relay (156-C3P20NCD) is widely used in industrial control applications where fast and precise control of three-phase loads is required, such as in HVAC systems and conveyor systems. In HVAC systems, the relay is used to control the power flow to air conditioning units and heaters, while in conveyor systems, it is used to control the motion of the conveyor belt.
By using solid state technology, the Allen Bradley 156-C3P20NCD relay provides fast switching times and more accurate control than traditional contact relays, resulting in improved energy efficiency and reduced maintenance costs. In HVAC systems, the use of these relays can result in a 10% to 15% improvement in energy efficiency by allowing for more precise temperature control, which translates into significant cost savings in energy bills.
The Allen Bradley Solid State Relay (156-C3P20NCD) is also well-suited to applications where there is a high level of electrical noise, as the relay has built-in diodes to prevent the generation of electrical noise that may interfere with other electronic devices.
Uses
The Allen Bradley Solid State Relay (156-C3P20NCD) has a number of key uses in industrial control systems, including:
1. Fast switching times for precision control of AC loads in three-phase systems
2. Separate coils for each phase, which ensures symmetrical currents and eliminates the need for multiple input wires for the COMMON terminal
3. Reverse voltage protection on all electrical inputs to prevent damage from voltage spikes and reverse polarity connections
4. Diodes to prevent the generation of electrical noise, which may result in interference with other electronic devices in the system
5. Built-in quadratic waveform filter to minimize voltage and current harmonics
6. Low time delay, which minimizes contact bounce and improves reliability compared to traditional relay technologies
These features make the Allen Bradley Solid State Relay (156-C3P20NCD) an ideal choice for industrial applications that require fast and precise control of three-phase electrical loads, such as in HVAC and conveyor systems.
Maintainance
Maintaining the Allen Bradley Solid State Relay (156-C3P20NCD) is relatively straightforward, as it has no mechanical components that can wear out or fail due to environmental factors. The relay does not require regular cleaning or lubrication, which eliminates the risk of contamination or damage from moisture, dirt, or dust, which can cause issues in traditional contact relays.
In terms of installation, the Allen Bradley 156-C3P20NCD relay has a typical maximum voltage rating of 480 VAC, which allows for a wide range of three-phase applications, without the need for multiple models with varying voltage ratings. This makes installation simpler and more cost-effective for the end-user, as they don’t have to stock multiple models, which can result in significant savings over time.
To ensure the long-term reliability of the Allen Bradley Solid State Relay (156-C3P20NCD), we recommend following the manufacturer’s guidelines for installation, wiring, and maintenance. These guidelines cover topics such as proper grounding techniques, limiters, and overload protection, which are all critical factors in ensuring the longevity and reliability of the device.
At Techno Control Corporation, we are committed to providing our customers with high-quality electrical products that meet the demands of modern industry. Our team of experienced engineers is available to provide technical support and assistance with the selection and installation of our products. If you have any questions or queries about the Allen Bradley Solid State Relay (156-C3P20NCD), or require assistance with your electrical applications, please do not hesitate to contact us.
Contact Information
Whatsapp: Contact
Contact Us: Go
Back to Blogs